How to select the type of hydraulic oscillating cylinder?

The selection of hydraulic oscillating cylinders should be based on specific working conditions. The main factors to consider include: 

Core parameter selection: 

The rated pressure of the oscillating cylinder is usually 16 MPa, the starting pressure is ≤ 1.5 MPa, and the working temperature range is from -50℃ to +260℃. If the working temperature remains above 100℃ continuously, a special high-temperature model should be indicated. 

Installation and Output Method: 

The shaft and hole of the oscillating cylinder adopt a double flat key structure, allowing the oscillation angle to rotate 180 degrees left and right at the middle position. When using the double toothed rail hole output, the torsional strength of the connecting shaft needs to be verified. 

Material and Sealing: 

Using special materials and advanced processing techniques, the sealing form is contact type, featuring low leakage and long service life. However, attention should be paid to the wear problem at the contact points. 

Special condition handling: 

In high-temperature conditions, a high-temperature label must be marked to prevent the sealing components from being damaged prematurely; in low-temperature conditions, no special treatment is required.